The MachinistPost Blog

Drill reconditioning, machining technique, shop management — by machinists, for machinists.

All Posts Technique Business Equipment Materials Troubleshooting
256 posts  ·  Page 8 of 11
MATERIALS
Drilling Hardened Steel With HSS
What it takes to drill hardened steel with HSS bits and when it is worth trying vs switching to carbide.
July 28, 2025
Read Article →
MATERIALS
Drilling Exotic Materials
How to approach drilling exotic alloys and advanced materials that demand non-standard techniques.
July 26, 2025
Read Article →
MATERIALS
Drilling Copper And Brass: Problems And Solutions
Common problems when drilling copper and brass and the geometry and technique fixes that solve them.
July 24, 2025
Read Article →
MATERIALS
Drilling Composite Materials
Best practices for drilling composite laminates to avoid delamination, splintering, and tool wear.
July 22, 2025
Read Article →
MATERIALS
Drilling Cast Iron: No Coolant, Correct Geometry
Why cast iron is drilled dry and how to choose the right geometry for clean, burr-free holes.
July 20, 2025
Read Article →
MATERIALS
Drilling Brass: Geometry Tips
The specific drill geometry changes that prevent brass from grabbing and self-feeding during drilling.
July 18, 2025
Read Article →
MATERIALS
Drilling Brass, Bronze, And Soft Metals
How to drill brass, bronze, and other soft metals without grabbing, chatter, or oversized holes.
July 16, 2025
Read Article →
TECHNIQUE
Drilling Best Practices Checklist
A 25-point checklist covering setup, speeds, feeds, and inspection for consistently good drilling results.
July 14, 2025
Read Article →
MATERIALS
Drilling Aluminum: Complete Guide
Everything you need to know about drilling aluminum alloys cleanly, quickly, and without built-up edge.
July 12, 2025
Read Article →
TECHNIQUE
Drilling Accurate Hole Patterns
How to lay out and drill accurate hole patterns without expensive fixtures or CNC equipment.
July 10, 2025
Read Article →
MATERIALS
Drilling Abrasive Materials: Fiberglass And Carbon Fiber
Strategies for drilling highly abrasive composite materials without rapid edge wear and delamination.
July 8, 2025
Read Article →
TROUBLESHOOTING
Drill Wear Patterns And What They Tell You
Reading the wear marks on a used drill to diagnose exactly what went wrong during the cut.
July 6, 2025
Read Article →
BUSINESS
Drill Tracking System For Your Shop
How to build a simple drill tracking system that tells you where every bit is and when it was last sharpened.
July 4, 2025
Read Article →
TECHNIQUE
Drilling A Straight Hole Without A Drill Press
Techniques for drilling straight, accurately located holes when a drill press is not available.
July 2, 2025
Read Article →
BUSINESS
Drill Storage And Handling: Investment Protection
How proper storage and handling practices protect your drill investment and extend usable tool life.
June 30, 2025
Read Article →
TECHNIQUE
Drill Speeds And Feeds Reference Guide
A comprehensive speeds and feeds reference for HSS drilling across the most common workpiece materials.
June 28, 2025
Read Article →
EQUIPMENT
Drill Sharpening Station For Small Shops
How to set up an effective drill sharpening station in a small shop without big capital investment.
June 26, 2025
Read Article →
TROUBLESHOOTING
Drill Runout: Measuring And Fixing
A practical guide to measuring drill runout accurately and the fixes that actually work.
June 24, 2025
Read Article →
TROUBLESHOOTING
Drill Runout, Hole Quality, And TIR
How TIR affects hole diameter, position, and finish, and what acceptable runout limits look like.
June 22, 2025
Read Article →
TROUBLESHOOTING
Drill Runout: How To Fix It
Diagnosing and correcting excessive drill runout to stop oversized holes and premature tool wear.
June 20, 2025
Read Article →
BUSINESS
Drill Reconditioning Log Setup
How to create and maintain a drill reconditioning log that feeds real data into your tooling decisions.
June 18, 2025
Read Article →
EQUIPMENT
Drill Press vs CNC Spindle Setup
How drill press and CNC spindle setups differ and what each demands from your drill geometry.
June 16, 2025
Read Article →
EQUIPMENT
Drill Press Setup: Centering Guide
How to center your workpiece under the spindle quickly and accurately on a drill press.
June 14, 2025
Read Article →
EQUIPMENT
Drill Press Setup For Accurate Holes
How to properly set up a drill press for accurate, repeatable holes every time.
June 12, 2025
Read Article →
← Prev 1234567891011 Next →